Petzl ROCPEC SDS-bit hand drill body, shown as a placeholder — bit sold separately, diameter not shown

Rocpec Bit

10 mm
$39.95
Skip to product information
Petzl ROCPEC SDS-bit hand drill body, shown as a placeholder — bit sold separately, diameter not shown
  • Petzl ROCPEC SDS-bit hand drill body, shown as a placeholder — bit sold separately, diameter not shown
  • Petzl ROCPEC SDS-bit hand drill body, shown as a placeholder — bit sold separately, diameter not shown
Rocpec Bit

Rocpec Bit

$39.95
Version

The Petzl ROCPEC BIT SDS is a replacement SDS drill bit sold for the Petzl ROCPEC hand drill, letting a technician re-equip the drill with a fresh bit in the field rather than replacing the whole tool.

Route developers, rope access technicians and industrial anchor installers use the Petzl ROCPEC hand drill to place rock and structural anchors by hand, where a powered rotary hammer is impractical to carry or run; the drill's SDS interface accepts a bit of the diameter the job requires, and bits install and remove without tools. This listing covers the bit only, sold separately from the drill body (reference P26) and the ROCPEC ADP adaptor. Siren Safety carries this bit under references P26210 and P26212 but could not confirm their diameters on a live Petzl page, so confirm the diameter you need before ordering.

Key features

  • SDS shank, matched to the Petzl ROCPEC hand drill's tool-free bit interface
  • Installs and removes without tools, for a fast bit swap in the field
  • Sold separately from the ROCPEC drill body, for re-equipping a drill already in service

Specifications

  • Interface: SDS bit shank
  • Diameter: not confirmed on a live Petzl page; Siren Safety lists this bit under two references, P26210 and P26212, for two different diameters (see notes)
  • Certification(s): none listed for the ROCPEC drill or its bits on Petzl's Canadian site

Works with

  • The Petzl ROCPEC (reference P26), the SDS-bit hand drill this bit is made to fit, which drills holes of varying depths and diameters depending on the bit installed
  • The Petzl ROCPEC ADP, an adaptor sold separately for the ROCPEC drill

Common questions

What diameter is the Petzl ROCPEC BIT SDS?

Siren Safety lists this bit under two references, P26210 and P26212, for two different diameters, but could not confirm the exact diameters on a live Petzl page; confirm the diameter you need with Siren Safety before ordering.

Does the ROCPEC BIT SDS need tools to install?

No, Petzl states that ROCPEC bits install and remove easily without the need for tools, so a technician can swap bits in the field.

What drill does the ROCPEC BIT SDS fit?

The Petzl ROCPEC BIT SDS is made for the Petzl ROCPEC hand drill (reference P26), a manual SDS-bit drill used to place rock and structural anchors.

You may also like